No complicated procedure is required for assembling BSM170. Simply link each components from bottom to top with a screw driver only, then you are ready to measure the height.
Head bar, large LCD with bright backlight and two simple buttons are all you need for height measurement. Simply step on the footplate after turning on the device to start the measurement and lock the value so that you do not lose your data.
Use the measured height value for your body composition measurement. Simply connect the BSM170 and the InBody, the professional body composition analyzer, via Bluetooth without any cable attached.
Height, Weight, BMI
35 ~ 210cm (1ft. 1.8in. ~ 6ft. 10.7in.)
± 9.9cm
± 1mm
10 ~ 200kg (22 ~ 441lb.)
Customized LCD 55*31 mm with Backlight
Auto 0 kg calibration during 3-15 seconds
of warming up
Weight, Height Measurement : 7 sec. Weight Measurement : 2 sec.
Weight and Height / Weight only / Height only
A(Measure height after weight measurement
NA(Press ENTER button after measuring weight
to measure height
Unit : 0.1kg, from 0.0kg to 5.0kg Unit : 0.1lb, from 0.0lb to 9.9lb
Available to choose 'kg/cm' and 'lb/in
Foldable height measuring part
Attaching wheels for carrying easily
10 ~ 40'C(50 ~ 104'F), 30 ~ 75%RH, 70 ~ 106kPa
Power Input : AC 100~240V, 50/60Hz,1.2A Power Output : DC 6V, 1.5V AA
Bluetooth
Thermal Printer(Optional, the printers
recommended by Biospace
390(W) × 500(L) × 2190(H) mm 15.3(W) × 19.7(L) × 86.2(H) inch
8.5 kg(18.7lbs)
-20 ~ 70'C(-4 ~ 158'F), 10 ~ 95%RH, 50 ~ 106kPa
(No condensation)